Test Setup - Test Configurator, Timer, and System
156 FTB-700G/800 Series
Interface (Ethernet, Packet Sync, Fibre Channel, and Wireless)
TX Frequency
TX Frequency (GHz) indicates the frequency (actual frequency +
Frequency offset) used for transmission.
Note: Frequency offset is not available with Wireless or RFC 6349 test application.
Offset (ppm) check box, when selected (cleared by default), allows to
set the frequency offset that will be generated: ±120 ppm. Use the “+”
or “-” button to respectively increment or decrement the frequency
offset value based on the defined Increment/Decrement Size, or
directly type the frequency offset value in the field.
Step Size (ppm) allows to set the increment/decrement value (from
0.1 to the maximum offset) that will be used when changing the
frequency offset with the “+” or “-” button.
To Next Page
Loading...
