Test Results
296 FTB-700G/800 Series
Alarms/Errors
BER
Alarms
No Traffic (Available with EtherBERT)
RX:
Ethernet: No pattern traffic has been received in the last second.
Fibre Channel: No traffic is being transmitted when Login Management
fails; a pop up displays No Data is being transmitted on Port(s)
<port number>. The Login process has failed.
Pattern Loss
RX:
Ethernet: More than 20 percent of bit errors are received or the
reference sequence can be unambiguously identified as out of phase.
Fibre Channel: bit error is detected on four consecutive words.
To Next Page
Loading...
