Test Results
406 FTB-700G/800 Series
Summary (EtherSAM)
Remote unit in Dual Test Set Mode indicates that this module is set as
remote but the DTS Connection is not established.
Service Configuration/Performance Test: Tap Service Configuration
Test or Service Performance Test button to view the result summary
of the corresponding test.
Service indicates the service’s number and name. For Service
Configuration Test, the number/name is highlighted in red per
service when VLAN mismatch occurred; in Dual Test Set, the
direction is also highlighted; in Dual Test Set, the R -> L direction
label is gray when VLAN Preservation is not supported by the
remote module.
Direction, available with Dual Test Set, indicates results from local
to remote (L->R) and remote to local (R->L).
Service Performance Test column displays the pass/fail verdict
icon indicating if the service complies to the configured SLA
parameters.
Service Configuration Test column displays the pass/fail verdict
icon indicating if the service complies to the configured SLA
parameters.
To Next Page
Loading...
