Test Control
556 FTB-700G/800 Series
Save/Load Button
Import/Export Tab
Configuration files can be transferred to and from an external USB media
as well as deleted.
Tap the Save/Load button and the Import/Export tab.
To import/export a test configuration:
1. Select the media from where the test configuration file(s) will be
copied: Favorites, Others, or a removable drive (USB media for
example) if present.
Favorites lists configuration files from:
Documents\810-880-NetBlazer\Configuration\Favorites.
Others lists configuration files from:
Documents\810-880-NetBlazer\Configuration.
2. From the Copy To drop list, select either Favorites, Others, or a
Removable Drives as the destination location where the file(s) will be
copied.
Favorites lists configuration files from:
Documents\810-880-NetBlazer\Configuration\Favorites.
Others lists configuration files from:
Documents\810-880-NetBlazer\Configuration.
3. Select the file(s) to be copied by selecting its corresponding check box
or tap the (Un)Select All button to select or unselect all files in the list.
4. Tap the Copy button.
5. A confirmation is displayed, tap OK.
To Next Page
Loading...
