Extreme Networks ExtremeSwitching X440-G2 Series User Manual

Figure 17: ExtremeSwitching X440-G2-48t-10GE4-DC Front Panel
1 = Stack number indicator 4 = 10/100/1000BASE-T ports
2 = Console port/Ethernet management port 5 = 1GBASE-X SFP combination ports
3 = USB port (active with ExtremeXOS version 22.2 or later)
Figure 18: ExtremeSwitching X440-G2-48t-10GE4-DC Rear Panel
1 = SFP Ports upgradeable to 10GBASE-X
4 = DC power connector panel
2 = 1GBASE-T combination ports upgradeable to 10GBASE-T 5 = Grounding lug
3 = Redundant power input
ExtremeSwitching X440-G2-12t8fx-GE4 Switch Ports and Slots
The ExtremeSwitching X440-G2-12t8fx-GE4 switch ports and slots include:
•
12 front panel 10/100/1000BASE-T ports, all of which support both half-duplex and full-duplex
communication.
•
Four unpopulated front panel 1GBASE-X SFP ports.
•
Eight 100BASE-FX LC connectors.
Note
The LC connectors are transceivers with an LC interface.
•
Ethernet management port (10/100/1000BASE-T).
•
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local
management.
ExtremeSwitching Switches
ExtremeSwitching and Summit Switches: Hardware Installation Guide 25

Extreme Networks ExtremeSwitching X440-G2 Series Specifications

General

Form Factor	Rack-mountable
VLAN Support	Yes
Humidity	5% to 95% non-condensing
Model	X440-G2 Series
Port Type	Gigabit Ethernet
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
Stacking	Yes, up to 8 switches
Layer Support	Layer 2/3
Operating Temperature	0°C to 50°C
Product Type	Switch
Jumbo Frames	9216 bytes
AC Power Supply	100-240 VAC, 50-60 Hz
Storage Temperature	-40°C to 70°C
Port Configuration	24 or 48 ports
Power over Ethernet (PoE)	Optional