Extreme Networks ExtremeSwitching X440-G2 Series - Page 27

•
24 front panel 100BASE-FX LC connectors.
Note
The LC connectors are transceivers with an LC interface.
•
Four unpopulated front panel 1GBASE-X SFP ports.
•
Ethernet management port (10/100/1000BASE-T).
•
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local
management.
•
One front panel USB 2.0 port, operational on switches running ExtremeXOS version 22.2 or later.
•
One rear redundant power supply connector.
The X440-G2 24fx-GE4 switch supports an operating range from 0°C to 60°C.
Figure 21: ExtremeSwitching X440-G2-24fx-GE4 Front Panel
1 = Stack number indicator
4 = 100BASE-FX LC connectors
2 = Console port/Ethernet management port 5 = 1GBASE-X SFP ports
3 = USB port (active with ExtremeXOS version 22.2 or later)
Figure 22: ExtremeSwitching X440-G2-24fx-GE4 Rear Panel
1 = Grounding lug
3 = AC power input socket
2 = Redundant power input
ExtremeSwitching X440-G2-24t-GE4 Switch Ports and Slots
The ExtremeSwitching X440-G2-24t-GE4 switch ports and slots include:
ExtremeSwitching Switches
ExtremeSwitching and Summit Switches: Hardware Installation Guide 27