Extreme Networks ExtremeSwitching X440-G2 Series User Manual

Mean Time Between Failures (MTBF)
Table 208: X695-48Y-8C MTBF
Switch Mean Time Between Failures
X695-48Y-8C-AC-F 389719 hrs @ 25°C
X695-48Y-8C-AC-R 450269 hrs @ 25°C
CPU, Memory
Table 209: CPU, Memory
2.2 GHz 64-bit CPU
16 Gb memory, 128 Gb SSD
4GB eMMC Flash Memory
32 MB buer, per chip
Standards
Table 210: Safety Standards
North American Safety of ITE UL 62368-1 2nd Ed., 2014-12-01, Listed Device (US)
UL 60950-1 2nd Ed., 2014-10-14, Listed Device (US)
CAN/CSA 22.2 #62368-1-14 2nd Ed., Canada
CAN/CSA 22.2 #60950-1-07 2nd Ed., Canada 2014-10
Complies with FCC 21 CFR Chapter 1, Sub-chapter J in accordance with FDA &
CDRH requirements (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
European Safety of ITE EN 62368-1
EN 60950
2014/35/EU Low Voltage Directive
International Safety of ITE CNS 14336-1
AS/NZX 60950-1 (Australia /New Zealand)
GB4943.1
IEC/EN 60825, IEC/EN 60825-2 (Lasers Safety)
IEC 62368-1
IEC 60950-1
Technical Specifications
ExtremeSwitching and Summit Switches: Hardware Installation Guide 361

Extreme Networks ExtremeSwitching X440-G2 Series Specifications

General

Form Factor	Rack-mountable
VLAN Support	Yes
Humidity	5% to 95% non-condensing
Model	X440-G2 Series
Port Type	Gigabit Ethernet
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
Stacking	Yes, up to 8 switches
Layer Support	Layer 2/3
Operating Temperature	0°C to 50°C
Product Type	Switch
Jumbo Frames	9216 bytes
AC Power Supply	100-240 VAC, 50-60 Hz
Storage Temperature	-40°C to 70°C
Port Configuration	24 or 48 ports
Power over Ethernet (PoE)	Optional