Fargo HDP5000 User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
5-26
Troubleshooting with the Printer Error Message Table (continued)
Printer Error
Message
Cause Solution
No Flipper The Printer does not have
flipping capabilities.
a. Verify the Printer has flipper
capabilities via the LCD Menu.
b. If Flipper capabilities are
present, ensure that the Print
Both Sides option in the driver
is set correctly.
c. Press the Resume button on the
Printer’s Front Cover to continue
printing.
d. To cancel the print, press the
Cancel Print button from the
Driver’s display dialog or press
the Cancel button located on
the Printer's LCD display.
Ribbon RFID Error The ribbon tag information
is corrupted or incorrect.
Check that the Ribbon is installed
properly. Cancel is the only option.
Press the Cancel Print button from
the Driver’s display dialog, or the
Cancel button located on the
Printer's LCD display.
Wrong Ribbon
Installed
An incorrect ribbon has
been installed, or a driver
setting is incorrect.
Check that the ribbon is correct for
the printer and job. Press the
Resume button located on the
Printer's LCD display to continue
printing.
To cancel the print, press the
Cancel Print button from the
Driver’s display dialog, or the
Cancel button located on the
Printer's LCD display.

Fargo HDP5000 Specifications

General

Maximum resolution	300 x 300 DPI
Print speed (color)	7 card/h
Print speed (monochrome)	14 card/h
Product color	Black
Internal memory	16 MB
Total input capacity	100 sheets
Compatible operating systems	Windows 2000 / XP / Server 2003 / Vista (32 bit) Mac OS X v10.4 / v10.5 Linux

Weight and Dimensions

Weight	7300 g
Dimensions (WxDxH)	313 x 235 x 292 mm