Fargo HDP5000 - Connecting Power to Printer and Module

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
3-20
Connecting Power to HDP5000 Printer and Lamination Module
Caution: Do not remove the red Warning sticker across the USB connection. Do
not plug in the USB cable until prompted to do so during the installation of the HDP5000
Printer Driver. See the Installing the Printer Driver on Windows XP and Windows 2000
procedure.
Step Procedure
1 The Printer connections are shown in the Displays A to D
2 Use the same procedure for both the Printer and the Lamination Module.
Display A - Connecting the AC power cable to the power supply.
.