RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
7-1
Section 7: Card Lamination Module
The HDP5000 supports the attachment of an optional Card Lamination Module. This Module
can be ordered pre-installed on the Printer from the factory or can be ordered separately as a
field upgradeable Module.
Once attached, the Card Lamination Module allows you to apply Fargo certified
overlaminates for more secure, tamper-resistant cards. This section explains all aspects of
the Card Lamination Module's operation and the overlaminate materials available.
a. See Using the Lamination tab (HDP5000-LC)
.
IMPORTANT! Fargo Card Printers require highly specialized Print Ribbons to function
properly. To maximize Printer life, reliability, printed card quality and durability, you must use
only Fargo Certified Supplies. For this reason, your Fargo warranty is void, where not
prohibited by law, if you use non-Fargo Certified Supplies. To order additional materials,
please contact your authorized reseller.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
