RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
8-75
Using the LRC Generation dropdown list
Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected track).
Step Procedure
1
• Select No LRC to change the LRC Generation to none.
OR
• Select Even Parity to change the LRC Generation to Even Parity. (Note:
This is the default for all tracks.)
OR
• Select Odd Parity to change the LRC Generation to Odd Parity.
To Next Page
Loading...
