Fargo HDP5000 - Selecting the Test Print Button

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
8-20
Selecting the Test Print button
When selected, a test PRN file will be sent to the Printer. See below. This file will print a Full
Color plus Resin print on the front side of the card and a Resin or black only image on the
backside. This image is the same as what is supplied in the Printer’s Supply Pack.
• For YMCK, the PRN file is full color and resin on front only.
• For YMCKK, the PRN file is full color front with resin on front and then the back is resin.
• For YMC, the PRN file is full color and front only.
• For YMCKH, the PRN file is full color with resin and front only.