RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
6-49
Upgrading the Main Firmware with the Fargo Workbench Printer Utility
(continued)
Step Procedure
3 Access the Upgrade Firmware window from the Actions Menu, as shown
below.
4 Select the New Firmware File by clicking Browse and selecting the Firmware
file from the appropriate folder.
5 Begin the upgrade by clicking Upgrade, as shown below.
Refer to the Fargo Workbench Printer Utility User Guide at this time.
To Next Page
Loading...
