RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
8-4
Selecting the Appropriate HDP Printer Driver settings
For the cases where custom settings are required, the Printer Driver's Card Type option also
includes Custom 1 and Custom 2 options.
• Settings: These settings allow designating a unique Card Type name, which then saves
custom Image Transfer settings.
• Custom 1: For example, Custom 1 could be changed to read as My Cards. Custom
transfer settings would then be available whenever this Card Type option is selected and
would be saved each time the Printer Driver setup window is closed.
• Custom Card stock: To determine the proper settings for custom card stock, Fargo
recommends the Tape adhesion Test.
To Next Page
Loading...
