96
Within the Link configuration window in FvDesigner:
Under Interface Type select Serial
Under Manufacturer select Omron Corporation
Under Product Series select Sysmac CS/CJ Series (FINS)
Under Port select COM3
2.3.3.4 PLC Message
When the first 4 error codes are 200A, it means that the last 4 error codes are created
by PLC.
Please refer to PLC manual
https://www.automationdirect.com/microsites/c-more/software-help/Content/476.ht
m
2.3.3.5 Wiring Diagrams
CJ1W-CIF11 (RS422/485)
To Next Page
Loading...