Fazzini FM5000C - Page 127

II-2
FM5000C - FM5000PLUS
Maternal/Fetal Monitor
User Manual
(3) Display Screen
Item
Specification
Display
12.1-inch TFT color touch screen
Display capacity
Up to 6 channels of waveform
Resolution
800×600
(4) Battery
Item
Specification
Battery specification
4400mAh, 14.8V lithium battery
Charge time
At least 5 hours from depletion to 90% charge and at least 5.5 hours from
depletion to 100% charge when the monitor is switched off.
Operatingtime
At least 5 hours for a new and fully charged battery under DEMO mode.
(5) Data Storage
Item
Specification
Trend data
Short trend
1 hour with resolution of 1 second and 5 seconds
Long trend
120 hours with resolution of 1 minute, 5 minutes and 10
minutes
Trend chart and
trend table
120hours
Alarm events
300parameter alarm events and related parameter waveform
Measured NIBP data
2,000 groups
Waveform history
Up to 120 minutes, subject to the type and quantity of the saved waveform.
Frozen waveform
240s mother waveform, 60h fetus waveform.
(6) Fetus Monitoring
Item
Specification
Work mode
Pulse wave
Ultrasound working frequency
(1MHz~3MHz) ±1%
Mechanical index(MI)
<1
Thermal index of soft tissure(TIS)
<1
Thermal index of bone(TIB)
<1
P- (peak negative acoustic pressure)
<1MPa
I
ob
(Intensity of output beam)
<5mW/cm
2
I
spta
(spatial peak - temporal average
intensity)
<100mW/cm
2
FHR measuring range
30bpm~250bpm
FHR measuring accuracy
±1bpm
FHR alarm range
30bpm~250bpm
FHR alarm error
±1bpm
TOCO measuring range
0~100
Non-linear TOCO measuring error
±8%
TOCO alarm range
0~100