Basic Operations
Printing Settings
1. Access [Main Menu]→[Monitor Setup]→[Print Setup] and
enter the print setup menu;
2. Or click the printer icon and enter the print setup menu.
Alarm Settings
1. Access [Main Menu]→[Monitor Setup] → [Alarm Setup].
Select [Alm Pause Time] to choose the alarm pause time.
2. Access [Main Menu], select [Maintain] and enter the
password; Select [Alm Setup]. Select [Max Alm Pause Time]
to adjust the maximum alarm pause time.
3. Select each parameter area. Take FHR1 as an example. Select
FHR1 parameter area and the [FHR1 Setup] menu will be
displayed; Select [FHR1 Alarm Setup] and enter FHR1 alarm
limit setup menu.
Patient Management
1. Click patient information area or click [Patient Management]
on-screen key.
2. In the pop-up menu, go to admit the patient, modify the patient
information and discharge the patient .
How to save user default settings:
1. Access [Main Menu], select [Maintain] and enter the
password;
2. Select [Save Current As User Config] to save current settings.
How to use factory adult/pediatric/neonate default settings:
1. Access [Main Menu]→[Monitor Setup] →[Restore
Default Configuration];
2. Select [Adopt Factory Default Adu Config], [Adopt
Factory Default Ped Config] or [Adopt Factory Default
Neo Config], the alarm limit will restore to the factory
default settings.
How to use user adult/pediatric/neonate default settings:
1. Access [Main Menu]→[Monitor Setup] →[Restore
Default Configuration];
2. Select [Default User Adu Config], [Default User Ped
Config] Or [Default User Neo Config], the alarm limit
will restore to the user default settings.
How to start timed monitoring
1. Click the timed monitoring information area on the
screen ,such as .
2. Or click [Timed Monitor] on-screen key;
3. Enter the [Timed Monitor] menu to set the related
parameters.
To Next Page
Loading...