Printing
How to print the fetal waveform under frozen waveform
status:
1. Under frozen waveform status, press the print key on the front
panel or click the [Print] on-screen key and enter the [Patient Info
& Fischer Grade] window;
2. Confirm the patient information and score results and click
[Confirm]. The monitor will start to print the frozen fetal
waveform from the very left waveform on current screen
according to the time length set in [Freeze Time].
3. If the [Report] is set to [ON], the score report will be printed
after frozen fetal waveform.
How to select score:
1. Enter [Main Menu] − [Monitor Setup] − [Print
Setup];
2. Or click print icon on icon area.
3. Click [Score Select] to show the scores on the case
report.
4. Click [Score Criterion] to select scoring criterion
you use (options: [KREBS], [Fischer], [Advanced
Fischer], [NST]).
To Next Page
Loading...