Printing
Real-time Printing
Real-time printing means the printing triggered by pressing the print
key on the front panel or clicking the [Print] on-screen key during real-
time monitoring.
How to print fetal waveform during real-time monitoring:
1. During real-time monitoring, press the print key on the front
panel or click the [Print] on-screen key and enter the [Patient
Info & Fischer Grade] window;
2. Confirm the patient information and score results and click
[Confirm]. The monitor starts to print the fetal waveform
according to the speed set in [Real Speed] and the time set in
[Real Time].
3. To stop printing during printing process, just press the print
key on the front panel or click the [Print] on-screen key. If
[Report] is set to [ON], the monitor will output the score report
immediately and then stop printing; if [Report] is set to [OFF],
the monitor will stop printing immediately.
Stored Patient Case Printing:
Stored patient case printing means the printing triggered by
pressing the print key on the front panel or clicking the
[Print] on-screen key after loading the patient case and
enter patient case review interface.
How to print stored patient case:
1. Access [Case List] window; Select a certain patient case
and enter [Patient Review] window;
2. Click [Load] and enter the patient case review window;
3. Press the print key on the front panel or click the [Print]
on-screen key and enter the [Patient Info & Fischer Grade]
window;
4. Confirm the patient information and score results and
click [Confirm]. The monitor will start to print the fetal
waveform from the very left waveform on current screen
according to the time length set in [Freeze Time].
To Next Page
Loading...