FM5000C - FM5000PLUS
Maternal/Fetal Monitor
Click here to directly access [TIMER] menu.
6. Icons area
Printer icon: display the printing status. During printing, this icon will show moving paper. Click it
to directly access [PRINT SETUP] menu.
FHR volume icon: click to adjust the FHR volume directly.
Alarm volume icon: clikc to adjust the alarm volume directly.
Battery icon: display the battery charge level. Click to directly access [POWER MANAGE] menu.
7. System time
Display the system time
Click here to directly access [DATETIME SETUP] menu.
8. Waveform area
Display the measurement waveforms with the waveform name at the left top corner.
Click the waveform area and the corresponding setup menu will be displayed.
9. Parameter area
Display the measured value and the set alarm limit of each measurement parameter.
The color of a certain parameter is the same as that of its waveform.
Click each parameter area and the corresponding setup menu will be displayed.
10. On-screen keys
Click each on-screen key and the corresponding setup menu will be displayed or a certain
operation will be performed.
Click or to show more on-screen keys.
To Next Page
Loading...
General