ST100 Series Flow Meter GENERAL
Fluid Components International LLC 5
Readout/Display and optical Touch buttons (optional):
• Large 2” x 2” [50 mm x 50 mm] LCD; digital plus bar graph and
engineering units
• Digital displays of flow rate, total flow, temperature and pressure
(with STP models); user selectable for engineering units
• Analog bar graph of flow rate
• Alarm status indication
• User programmable 17 alphanumeric character field associated
with each calibration group
• Set-Up & Service mode displays text and service codes
• Four (4) optical touch buttons for user programming of instrument
set-up and service interrogation
• Optical touch button activation through front window – no need to
open enclosure to access or activate
• Display is electronically rotatable in 90° increments to optimize
viewing angle
Note:
If readout/display not ordered, all user set-up and service
interrogation must be done via computer link to bus comm and/or
USB port.
To Next Page
Loading...
Need help?
General
