115
OPERATION
27.3 Setting measurement and
counting direction
Operation_Pic_number:1
Text-module
● Press key (F1). The following submenu appe-
ars.
Operation_Pic_number:1
Text-module
Press key (F1), select between:
Real speed
(Radar sensor).
Theoretical speed (the
measurement result is distorted if
there is wheel slip).
Press key (F2), select between:
Measurement only available with
forward travel
(Standard setting).
Measurement only when travelling
in reverse.
Measurement only in forward travel
(in reverse, the calculation is
subtracted).
Fig.274
Fig.275
Text-module
NOTE:
Press ESC to return to previous menu level.
27.4 Manually triggered measu-
ring and counting
Operation_Pic_number:1
Text-module
● Press key (F2 or F3 or F4 or F5) (location
1 - 4). The following submenu appears.
Operation_Pic_number:1
Measurement only in reverse (in
forward travel, the calculation is
subtracted).
Measurement in forward and
reverse.
Set trailed implement width with
rotary control (P1).
Fig.276
Fig.277
To Next Page
Loading...