FENDT 926 Vario - Page 136

136
OPERATION
30.9 Modifying configuration
lists
Text-module
There are four configuration lists, which can be
changed according to the operating conditions.
Text-module
Text-module
The factory settings (Fendt settings) for the
configuration lists are:
Text-module
List 1
Text-module
List 2
Text-module
List 3
Text-module
Use key (F4) to scroll through the
configuration lists.
Function Trigger
Lifting gear Distance
PTO Lift height
Electric hydraulic valves Distance
Vario transmission cruise
control
Distance
Four-wheel drive Distance
Differential lock Distance
Electronic engine speed Distance
Function Trigger
Lifting gear Time
PTO Time
Electric hydraulic valves Time
Vario transmission cruise
control
Time
Four-wheel drive Time
Differential lock Time
Electronic engine speed Time
Function Trigger
Lifting gear Manual
PTO Manual
Electric hydraulic valves Manual
Vario transmission cruise
control
Manual
Four-wheel drive Manual
Differential lock Manual
Electronic engine speed Manual
List 4
Operation_Pic_number:1
Operation_Pic_number:1
Function Trigger
--
--
--
--
--
--
--
Press key (F3). The following
submenu appears.
Indicator showing the button on the
joystick to which the configuration
list is assigned.
Use key (F1)
To change the key assignment.
Fig.337
Fig.338