208
FAULTS AND REMEDIAL ACTIONS
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
10. Contaminated air filter
Indication accompanied by intermittent audible signal and warning lamp.
Cause Remedial Action
Air filter main cartridge dirty. Check air filter main cartridge. If necessary, clean
or replace the air filter main cartridge.
11. Instrument cluster memory
Display accompanied by a continuous beep and warning light.
Cause Remedial Action
Invalid programming of combination instrument. Re-programme (at workshop).
12. Hand brake on
Indication accompanied by intermittent audible signal and warning lamp.
Note: only when tractor moving.
Cause Remedial Action
Hand brake applied. Release parking brake.
13. Engine speed too high
Indication accompanied by intermittent audible signal and warning lamp.
Cause Remedial Action
Engine speed too high. Reduce engine speed.
14. Rear PTO on neutral
Display accompanied by warning light.
Cause Remedial Action
PTO speed not preselected. Pre-select PTO speed.