FENDT 926 Vario User Manual

215
FAULTS AND REMEDIAL ACTIONS
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
1.3 Clearing a warning or fault message
Text-module
27. Fault in the Variotronic Ti
One or more functions defective.
Variotronic Ti functions cannot be played back.
28. Memory function
One or more functions faulty when activating the memory function.
Start tractor again, if the fault message is still there. Call workshop.
29. Fault in Tractor Management System
Restricted operation. Call workshop.
30. Fault in the PTO power lift automatic function
Call workshop.
31. When starting tractor, activating key depressed or jammed
Release activating key.
32. Plausibility error accelerator rotary control
Accelerator mode is no longer possible.
33. Driving mode selector calibration error
Calibrate the driving mode selector.
Press key and hold.
Then press button.
Each stored fault messages must be cleared individually. Clearing a fault message does not remove
the fault, it is simply no longer displayed.
If the fault is still present, it is indicated again the next time the tractor is started.

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available