223
FAULTS AND REMEDIAL ACTIONS
2. Variotronic Ti fault messages
Text-module
Fault messages are displayed as symbols on the Vario terminal.
Each stored fault messages must be cleared individually. Clearing a fault message does not remove
the fault, it is simply no longer displayed.
Operation_Pic_number:1
● Press key (F3). Confirm fault message.
● Press key (F4). Cancel process.
Fault-module
Fault-module
Fault-module
Fault-module
1. Fault in a sub-function
Read error code from the multi-display. Consult workshop.
2. Memory fault (EEPROM)
If this occurs several times, consult workshop.
3. Memory fault (system)
If this occurs several times, consult workshop.
4. Specified/actual value error
Process is cancelled.
Fig.3
To Next Page
Loading...