FENDT 926 Vario - Page 224

224
FAULTS AND REMEDIAL ACTIONS
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
Fault-module
5. Timeout exceeded (max. 120 seconds)
Process is cancelled.
6. Distance exceeded (max. 300 meters)
Process is cancelled.
7. No configuration available
Create configuration. Start recording again.
8. Communication error on operating console
Call workshop.
9. Joystick faulty
Call workshop.
10. Automatic mode memory error
Call workshop.
11. Fault in a sub-function
Read error code from the multi-display. Consult workshop.