261
TECHNICAL DATA
Brake pedal free play max. 110 mm.
X X X X Check active parking function. After the test drive. Stop the tractor using the joystick. Active symbol appears in
the multi-display. After the tractor has been stationary for about 5 seconds, open
the emergency operation cover.
Engage driving mode II, turn the transmission adjuster about 15 degrees to the
left.
The tractor should not move forward.
For summary of services, see Operating Manual
(inside back cover) and also the workshop data
card.
1) Max. values Whichever comes first. In difficult
operating conditions, more frequent maintenance
is recommended. Always have the main service
carried out before long periods of non-use.
2) If the fuel contains more than 0.5% sulphur, the
oil replacement intervals should be halved.
4) For registered trade names, refer to the current
list of Fluids and Lubricants, which is available
(as customer information) from every Fendt-ap-
proved workshop.
3) VISCOSITY OF ENGINE OILS
No.
Services
regularly 1)
daily
Job Schedule
See also Operating Manual
Care and Maintenance
General notes and technical data, types of fluid and oil
Correct levels are determined by dipstick check or from the overflow at the
inspection hole.
Observe all accident prevention regulations and comply with directives for
handling and disposing of fluid and lubricants.
1.
50
2.
250
3.
500
4.
750
5.
1000
annu
al or
every
500
every 2
years
or
2000
operating hours
Monograde oils Multigrade oils
To Next Page
Loading...
Need help?
General
