FENDT 926 Vario User Manual

61
OPERATION
14.2 PTO automatic mode
Allows the control of rear and front PTOs to be
transferred to the buttons on the joystick.
Activating the automatic function
Operation_Pic_number:1
● Selecting PTO speed for rear PTO, (see
OPERATION Section 10.1).
NOTE:
The automatic function can be deselected at
any time.
Button (J), rear PTO automatic mode
ON/OFF.
Button (Q), front PTO automatic mode
ON/OFF.
Fig.104
Using automatic mode
Operation_Pic_number:1
Text-module
● Button (A1), front PTO ON.
● Button (A2), front PTO OFF.
● Toggle switch to (B1), rear PTO ON.
● Toggle switch to (B2), rear PTO OFF.
● Stop button (C), PTOs (front and rear) are
both disengaged.
Text-module
NOTE:
The PTO automatic mode can be activated
with PTOs engaged or disengaged.
Fig.105

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available