FENDT 926 Vario User Manual

75
OPERATION
Use the 28 bar position for implements with long
hoses, for load sensing signal / or external
pressure supply (for example with manure vat).
NOTE:
In the 28 bar position, there are higher hy-
draulic losses, which cause the oil to heat up.
Front hydraulic connections
Operation_Pic_number:1
C = Red valve.
RF = Front return flow.
(black coding).
Fig.149
18. Electronic lifting
gear control, rear
18.1 Controls
Operating console, right side
Operation_Pic_number:1
G = Depth control
H = Quick Lift key
Vario terminal
Operation_Pic_number:1
A = Lift height
B = Lowering speed
C = Position/traction mix control
D = DA function active indicator
Fast feed-in
Hitch-lift
EPC automatic mode
(also refer to OPERATION
Section 14.1).
Fig.150
Fig.151

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available