105
Rev. 5.1
ZMT-ZMTE
SCRAPPING AND DISPOSAL
10-DEMOLIZIONE E SMALTIMENTO
10 SCRAPPING AND DISPOSAL
If the machine is to be scrapped, it must be disposed of in suitable waste disposal sites in accordance with the
regulations in force.
In the case of demolition of the machine, all parts that could constitute a hazard must be made safe.
Recover any old oil and dispose of it in special oil disposal centres.
Before scrapping the machine, separate plastic or rubber parts, electric and electronic material.
The materials that make up the machine, and which must be disposed of in a dierentiated manner, are:
► Steel
► Mineral oil
► Rubber
► Plastic
► Electrical system wires
The parts consisting exclusively of plastic, aluminium and steel can be recycled at appropriated dierentiated collection
centres.
Never dispose of used oil into the environment. Oil is classied as special waste and must
be brought to the appropriate collection centres according to the regulations in force.
WARNING
To Next Page
Loading...