FERRI ZMT - State of the Belts

82
ZMT-ZMTE
Rev. 5.1
ROUTINE MAINTENANCE
07-Stato delle cinghie
7.5 Stateofthebelts
Check for correct belt tension every 50 hours.
Replace the belts every 500 hours.
CAUTION
New belts
If the belts are new, make the rst check after 4 hours of work to check how they are settling and the degree of
tension.
Used belts
If the belts are settled or have been used for more than 24 hours, check the state of wear and, if necessary, restore
the correct tension value (see Chapter 5).