FERRI ZMT - Checklist; Every 8 Working Hours or Daily

76
ZMT-ZMTE
Rev. 5.1
ROUTINE MAINTENANCE
07-Checklist_new
7.2 Checklist
The Checklist serves to schedule all the maintenance operations and to monitor the frequency with which they are
performed in order to ensure the correct routine maintenance of the machine.
The manufacturer recommends keeping the original document attached to the instruction manual, and creating personal
copies for every authorised technician, to make a note of the interventions carried out on the machine.
7.2.1 Every8workinghoursordaily
► Check that screws and nuts are tightened
► Check that the tools are not worn and are intact
► Check that the accident prevention protections are intact
► Grease pins, bearings, universal joints and PTO shaft telescopic barrel, etc.