30
ZMT-ZMTE
Rev. 5.1
SAFETY RULES
2.3
02-Pittogrammi di sicurezza ANSI
1
ZMT/E
CLEANING BLOCKAGES HAZARD
TO PREVENT SERIOUS
INJURY OR DEATH FROM
CLEANING BLOCKAGES HAZARD:
DANGER
1801435
THROW OBJECTS HAZARD
STAY AWAY FROM
MACHINE
TO PREVENT SERIOUS
INJURY OR DEATH FROM
THROW OBJECTS:
• Stay away from machine
when it is running.
• Keep others away.
DANGER
1801446
FALLING OFF HAZARD
TO PREVENT SERIOUS
INJURY OR DEATH FROM
FALLING OFF HAZARD:
• Don’t mount or dismount while
tractor is moving.
• Never allow children or other
person to operate or ride on the
tractor or implement.
• There is no safe place for
anyone else, either on the tractor
itself or on any of its implements.
WARNING
1801436
•
Don’t allow anyone to stand between
implement and moving tractor.
•
Stop tractor engine and set park
brake before installing pins.
•
Don’t allow anyone to stand between
the tractor and implement when
backing up to the machine.
TO PREVENT SERIOUS INJURY
OR DEATH FROM CRUSHING
HAZARD:
DANGER
• All driveline guards, tractor
and equipment shields in place
• Drivelines securely
attached at both ends
• Driveline guards thet turn
freely on driveline
1801429
ROTATING DRIVELINE
CONTACT CAN CAUSE DEATH
KEEP AWAY!
DO NOT OPERATE WITHOUT:
WARNING
1801430
DO NOT EXCEED PTO SPEED OF
540 RPM
PTO speeds higher than 540 RPM can cause
equipment failure and personal ijury
540
WARNING
1801427
•
Don’t open or remove safety shields
while moving parts are running.
•
Close and secure guards and
shields before starting.
•
Keep hands, feet, hair and clothing
away from all moving and/or rotating
parts.
TO PREVENT SERIOUS INJURY
OR DEATH FOR MOVING PARTS:
WARNING
1801426
DANGER
1801432
• Stop immediately the rotor, disengage the
drive to the mower, stop the engine, set
brake, remove the key and wait for the
mower blades to stop.
• Don’t try to disentangle by inverting
the rotational direction of the rotor.
• Clear the rotor after put working gloves
on, with the aid of pliers or shears.
• Never clean blockages with the engine
or moving parts running.
DANGER
1801435
THROW OBJECTS HAZARD
STAY AWAY FROM
MACHINE
TO PREVENT SERIOUS
INJURY OR DEATH FROM
THROW OBJECTS:
• Stay away from machine
when it is running.
• Keep others away.
DANGER
1801447
FALLING HAZARD
TO PREVENT SERIOUS
INJURY OR DEATH FROM
FALLING HAZARD:
• Do not allow anyone to riders
on boom mowers or tractor.
• Never use the implement for
a man lift or personnel lift.
• Never use the cutter for a crane
or lifting device of any kind.
DANGER
1801437
CRUSHING HAZARD
TO PREVENT SERIOUS
INJURY OR DEATH FROM
CRUSHING HAZARD:
• Block up or support raised machine
and all lifted components securely
before putting hands or feet under
or working underneath any lifted
component.
• Make certain that area is clear
before lowering or folding.
WARNING
1801443
•
Stop tractor engine, place all controls
in neutral, set park brake, remove
ingnition key and wait for all moving
parts to stop before servicing,
adjusting, reparing, unplugging or
filling .
READ AND UNDERSTAND THE
OPERATOR’S MANUAL BEFORE
USING:
CAUTION
1801452
OPERATING SAFETY
1. Read and Understand the Operator’s Manual and all Safety Signs before
operating, servicing, adjusting, reparing or unplugging.
2. Do not allow riders.
3. Install and secure all guards and shields before starting or operating.
4. Keep hands, feet, hair and clothing away from all moving and/or rotating
parts.
5. Place all controls in neutral, stop tractor engine, set park brake, remove
ignition key and wait for all moving parts to stop before servicing, adjusting,
reparing or unplugging.
6. Clear the area of bystanders, especially small children, before starting.
7. Use hazard flashers on tractor when transporting.
8. Do not put hands or feet under machine while tractor engine or machine
are running.
9. Objects can be thrown out from under machine with sufficient force to
severely injure people. Stay away from machine when it is running. Keep
others away.
10. Always know the area you are mowing. Never operate the Implement in
an area that has hidden obstacles.
11. Review safety instructions with all operators annually.
PINCH
1801434
WARNING
1801436
•
Don’t allow anyone to stand between
implement and moving tractor.
•
Stop tractor engine and set park
brake before installing pins.
•
Don’t allow anyone to stand between
the tractor and implement when
backing up to the machine.
TO PREVENT SERIOUS INJURY
OR DEATH FROM CRUSHING
HAZARD:
1801425
HIGH-PRESSURE
FLUID HAZARD
TO PREVENT SERIOUS
INJURY OR DEATH:
• Relieve pressure on hydraulic
system before servicing or
disconnecting hoses.
• Wear proper hands and eyes
protections when searching for
leaks. Use wood or cardboard
instead of hands.
• Keep any hydraulic lines fittings
and couples tight and free of leaks
before starting.
2.8.2 Replacing“ISO”decalswith“ANSI”decals
If the machine is sold in Countries outside the European Community where the ANSI Z535.4 reference standard is in
force, make sure that when the machine is delivered the decals required by said standard are applied on it.
If it is necessary to replace the ISO decals (yellow background) with ANSI decals, the Manufacturer provides a kit (1)
of replacement decals to be applied (by the Retailer or at the End Customer's premises) as illustrated in the gure.
To Next Page
Loading...