FERRI ZMT - Before Use or Putting into Service after a Long Peroid of Inactivity

86
ZMT-ZMTE
Rev. 5.1
ROUTINE MAINTENANCE
07-Primo utilizzo o rimessa in servizio
7.8 Beforeuseorputtingintoserviceafteralongperoidofinactivity
Before using the machine for the rst time or after a long peroid of inactivity:
► Check that the machine is not damaged;
► Check that the mechanical parts are in good condition and free of rust;
► Check the level of liquid in the hydraulic system;
► Check the state of wear of the ails;
► Check that the light bar and the electric system work;
► Clean away any protective substances covering the moving parts;
► Thoroughly grease all the moving parts;
► Make sure that there are no leakages of oil from ttings or tubes;
► Check that all the guards are positioned correctly;
► Check that the system functions properly;
► Protect all the electrical connections with anti-oxidants.