FERRI ZMT - Responsibility of the Operator or Owner

19
Rev. 5.1
ZMT-ZMTE
SAFETY RULES
02-Norme di sicurezza durante l'uso
Safe operating speed depends on terrain condition, the type of material to cut, as well
as its density and height.
WARNING
Use slow operating speeds if working on steep slopes, overhead constructions, ditches
and when obstacles or debris on the ground must be avoided.
WARNING
Always keep the ail head close to the ground when the boom extensions are being
opened, in order to ensure the machine is transversally stable regardless of the work
conditions and of the characteristics of the ground.
WARNING
Avoid opening the boom horizontally when above slopes, canals, ditches or the like.
WARNING
2.3.1 Responsibilityoftheoperatororowner
The owner or operator is responsible for reading this manual and instructing all operators before they begin working
with this machine. Risk assessment and accident prevention depend on the prudence, attention and common sense
of the personnel involved in the operation, transport, maintenance and storage of the equipment or in its use and
service maintenance.
Follow all the instructions from beginning to end. Safety is in everybody's interest. Following all the safety procedures
recommended allows processes to be performed safely, both for operators and for persons within the machine working
area. Operators who have not followed instructional training are not qualied to operate with the machine.