FERRI ZMT - Page 27

27
Rev. 5.1
ZMT-ZMTE
SAFETY RULES
02-Tabella Pittogrammi (ISO)
DESCRIPTION OF THE DECALS
11
Use the required personal protection equipment.
12
Keep at a distance from: PTO transmission shaft; Do not perform any maintenance and/or
inspection operations when the power takeo󰀨 is switched on.
13
Risk of crushing and cutting the hands. Do not put your hands near the moving parts of the
machine.
14
1801378
Coupling point for lifting the machine. To lift the machine, attach hooks to the machine exclusively
in the points indicated.
15
Risk of falling of lifted parts of the machine. Do not stand below the machine or in its vicinity
during the work phases.
16
Do not, for any reason, get in between the tractor and the machine with the engine running and/
or the power takeo󰀨 switched on.
17
Ensure that the ails and the other parts of the machine are completely stopped before
approaching.
18
To handle the machine with a fork-lift truck, use only the points indicated.
19
Grease points. Carry out routine maintenance every 8 working hours
(see Chapter 7).
20
GIRI R. P. M.
TOURS DREHEZAHL
MAX. 540
Indicates the direction of rotation and the number of revolutions (540 rpm) of the
tractor power takeo󰀨.