FERRI ZMT - Page 42

To Next Page

To Previous Page

ZMT-ZMTE

Rev. 5.1

TECHNICAL CHARACTERISTICS

Page left intentionally blank

03-Varianti (Slitte)

Main Page

Table of Contents3
General Information9
Purpose and Contents of the Manual9
Who Should Read this Manual9
Updates to the Manual9
Conservation9
Copyrights9
Spare Parts10
Machine Versions11
Safety Rules13
General Safety Rules13
Safety Rules Concerning Road Traffic17
Safety Rules During Use18
Responsibility of the Operator or Owner19
Safety Rules Concerning the Hydraulic System20
Fire-Prevention Methods21
Protection and Equipment for the Operator22
Maintenance: Safety Rules23
Working Range of the Machine24
Safety Decals25
Replacing Safety Decals29
Replacing "ISO" Decals with "ANSI" Decals30
Technical Characteristics31
General Description of the Machine31
Proper and Improper Use of the Machine31
Machine Identification33
Description of the Parts34
Technical Data (ZMT)35
Technical Data (ZMTE)36
Noise Level37
Radius of Work38
Optional Equipment39
Controls with Distributor40
Runners (Optional)41
Installation and Handling43
Lifting43
Removal of Packaging and Pre-Assembly44
Coupling to Tractor52
Attaching Without a Quick Hitch53
Attaching with a Quick Hitch53
Hydraulic Connections for Lateral Movement54
Fitting the PTO Shaft55
Tractor Stability58
Detachment from the Tractor59
Adjustments61
Working Speed Adjustment61
Adjusting the Cutting Height62
Adjusting the Belt Tension64
Use and Operating Rules67
Controls67
Positioning of the Machine During Operation68
Starting69
Preliminary Checks69
Starting up the Machine69
Working Mode70
Stopping71
Transport Position72
Routine Maintenance75
General Information75
Checklist76
Every 8 Working Hours or Daily76
Every 50 Working Hours or Every Month77
Every 200 Working Hours78
Every 500 Working Hours or Every Month79
Oil Table80
Greasing81
State of the Belts82
Fastening the Hydraulic Hose Couplings83
Bolt Tightening84
Before Use or Putting into Service after a Long Peroid of Inactivity86
Parking or Storage87
Extraordinary Maintenance89
Pipe Replacement90
Belt Replacement91
Pulley Replacement93
Pin Replacement94
Guards95
Flaps95
Rotor97
Flail Replacement98
Trouble Shooting Chart99
General99
Scrapping and Disposal105
Warranty107
Voiding of the Warranty107
Optional Units109
Controls with Distributor110
Assembly Procedure110
Adjustable Lateral Rollers112
Hydraulic Safety Device Kit113
Hydraulic Ram Blocking Kit114

FERRI ZMT - Page 42

Table of Contents