FERRI ZMT - Page 5

5
Rev. 5.1
ZMT-ZMTE
DECLARATION OF CONFORMITY
Dichiarazione di conformità
DECLARATION OF CONFORMITY
The CE Declaration of Conformity, provided together with the machine, is the document with which the Manufacturer
certies, under its own responsibility, that it has complied with observance of the European Directives, the Standards
and Technical Specications necessary (specied in said Declaration) in order for the machine to conform to the basic
requirements for sale and use in the European Union.
The Declaration of conformity must be considered as an integral part of the machine and must always accompany
the machine until it is scrapped.
If this document is not delivered together with the machine or gets lost, please request a copy from the Manufacturer.
The bottom part of the Declaration of Conformity contains the Warranty Coupon which must be completed in full and
N°
CE Declaration of Conformity
According to 2006/42/CE Directive
(that abrogate 98/37/CE Directive)
The undersigned FERRI s.r.l. state on its own responsibility that the machine
description of machine code series (flail head/series) serial no.
complies with the Essential Safety and Health Protection Requirements of the 2006/42/CE Directive and to
the electromagnetic compatibility for models equipped with electro/electronic devices according the
2004/108/CE Directive.
To answer to Conformity, according to the above mentioned Directives, following rules have been
considerated:
As well as the technical detailed list:
(Name and qualification of the delegate of the manufacturer)
Signature of the delegate
Tamara,
Person authorised to form the Technical file
Dr. Sandro Ferri
(Place and date)
FERRI s.r.l. – Via Govoni, 30 – 44034 Tamara (Ferrara) – Italia - Tel. +39.0532.866 866 - Fax +39.0532.866 851
(to cut along the outlined line)
To fill out by the Distributor with user’s details
Date
ata
WARRANTY COUPON
Surname Name
Series
Date
Company Ragione Sociale User Signature
Address
City or Town State/Prov
Postal
Code
Machine Model
Serial N°
Telefono Fax
Serial N° Series
Distributor stamp and signature
Machine Model
Taken note of the Use and Maintenance Book and
of the use’s rules (Safety Rules included)
Distributor Stamp
User Signature (legible)
FAC-SIMILE
returned to the Manufacturer in order for the rights under the warranty to be valid (see Chapter 11).