Festo CMMP-AS-...-M0 Series Description

CMMP-AS-...-M0
Festo – GDCP-CMMP-M0-FW-E N – 1304N H 7
Documentation
You will find additional information on the motor controller in the following documentation:
User documentation on the motor controller CMMP-AS-...-M0
Name, type Contents
Hardware description,
GDCP-CMMP-M0-HW-...
Mounting and installation of the motor controller
CMM P-AS-...-M0 for all variants/out put classes (1-ph ase,
3-phase), pin assignments, error messages, maintenance.
Description of functions,
GDCP-CMMP-M0-FW-...
Functional de scription (firmware) CMMP-AS-...-M0, instructions
on c ommissioning.
Description of FHPP,
GDCP-CMMP-M3/-M0-C-HP-...
Control and parameterisation of the motor controller via the
FHPP Festo profile.
– Motor controller CMMP-AS -...-M3 with the following
fieldbuses: CANopen, PROFINET, PROFIBUS, Ethe rNet/IP,
DeviceNet, EtherC AT.
– Motor controller CMMP-AS -...-M0 with fieldbus CANopen.
Description of CiA 402 (DS 402),
GDCP-CMMP-M3/-M0-C-CO-...
Control and parameterisation of the motor controller via the
device profile CiA 402 (DS402)
– Motor controller CMMP-AS -...-M3 with the following
fieldbuses: CANopen and Et herCAT.
– Motor controller CMMP-AS -...-M0 with fieldbus CANopen.
Description of CAM editor,
P.BE-CMMP-CAM-SW-...
Cam disc function (CAM) of the motor controller
CMM P-AS-...-M3/-M0.
Description of the safety function
STO, GD CP-CMMP-AS-M0-S1-.. .
Functional safety engineering for the motor controller
CMM P-AS-...-M0 with the integrated safety function STO.
Help for the FCT plug-in CMMP-AS User interface and functions of the CMMP-AS plug-in for the
Festo Configuration Tool.
 www.festo.com
Tab. 1 Documentation on the motor controller CMM P-AS-...-M0

Festo CMMP-AS-...-M0 Series Specifications

General

Brand	Festo
Model	CMMP-AS-...-M0 Series
Category	Controller
Language	English