1 Safety and requirements for product use
Festo – GDCP-CMMS-AS-G2-HW-EN – 1310NH – English 9
1.1.2 Intended u s e
The motor controller CMMS-A S -...-G2. is a digital positioning c ontroller for servo motors for
– supply and activation o f t he motor
– regulation of speed (current), torque and position.
The motor controller supports the following safety function:
– “Safe Torque Off ” (STO)
Category 3/PL d in accordance with EN ISO 13849-1.
Use exclusively:
– in faultless technical condition
– in original status, without unauthorised modifications
– within the limits of the product defined by the technical data ( Appendix A.1)
– in an industrial environment
– as an installed device in a control cabinet.
In the event of damage caused by unauthorised manipulation or other than intended use,
the guarantee is invalidated and the manufacturer is not liable for damages.
To Next Page
Loading...
Need help?
General
