3 | Assembly FISCHER Mess- und Regeltechnik GmbH
14 BA_EN_DE90
1. Differential pressure measurement
2. Pressure measurement
3.3.1 Replacement plates
Depending on the number of measuring channels, the device is equipped with
various replacement plates.
Channel 1 Channel 1 Channel 2
Fig.7: Replacement plate
These replacement plates are equipped ex-works with the required process
connections and the M12 flange connectors for the electrical connection. The
user may not make any independent modifications.
Pneumatic plug connection
for hydraulic hoses
CK quick-action screw connection
for soft hoses
cutting ring screw connection
for hydraulic tubes (stainless steel)
process connection type
Polyamide hose 6 x 4 x 1 mm
size
8 x 6 x 1 mm
PVC hose
TYGON
8 x 6 x 1 mm
6 x 4 x 1 mm
8 mm outside
6 mm outsidetube
®
Fig.8: Process connection table
To Next Page
Loading...