EasyManua.ls Logo

FISCHER PRO-LINE DE90 - Digital Interfaces; Auxiliary Energy; Operating Conditions; Display

FISCHER PRO-LINE DE90
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 | Technical data FISCHER Mess- und Regeltechnik GmbH
98 BA_EN_DE90
7.5 Digital interfaces
USB interface
USB On The Go 2.0
Data rate 12 Mbit/s (Full Speed)
Port Micro USB typee B
Communication Host/Device mode
Modbus RTU interface
interface RS 485
Report Modbus RTU
Modbus specification Application Protocol Specification
V1.1b3 (April 26, 2012)
Address 1 … 255
Baud rate 2400 … 115200 Baud
Parity Even, uneven, parity
Stopbits 1…2
7.6 Auxiliary energy
NOTICE!A CE-conform mains adapter with a slow 200 mA fuse only may
be used in the power supply circuit for ATEX devices.
Nominal voltage 24 V AC/DC
Admissible operating voltage U
b
19.2 … 28.8 V AC/DC
Power consumption Type 2W (VA)
Max. 3W (VA)
7.7 Operating conditions
Standard ATEX
Ambient temperature range -20 … +70 °C -20 … +60 °C
Medium temperature range -20 … +70 °C -20 … +60 °C
Storage temperature range -20 … +70 °C -20 … +70 °C
Protection IP65 IP65
ATEX EN IEC 60079-0:2018
EN 60079-15:2010
EN 60079-31
EMC EN 60730-1:2016
EN 61326-1:2013
EN 61326-2-3:2013
RoHS EN IEC 63000:2018
7.8 Display
Display Full graphic LC display
Resolution 128 x 64 Pixel
Backlight RGB
Measured value display 6 digits

Table of Contents