FISCHER PRO-LINE DE90 - Setup; Set Menu Language; Measuring Point Designation; Configuration

FISCHER Mess- und Regeltechnik GmbH Start-up | 4
BA_EN_DE90 25
4.3 Setup
The measuring device is delivered in the configuration stated in the Order code
[}101]. However, some parameters can be modified quickly and easily via the
menu Quick access [}41].
• Menu language
• Measuring point designation
• Configuration
4.3.1 Set menu language
Works setting: German or ordered national language
w The menu language can be changed as follows.
1. You have the right to change the configuration.
2. Log onto the device and go to the quick access.
3. Open the menu Language and change the menu language.
4.3.2 Measuring point designation
w A designation for the measuring point can be filed to identify the device
within a system.
1. You have the right to change the configuration.
2. Log onto the device and go to the quick access.
3. Change the Designation parameter.
4.3.3 Configuration
The measuring device is delivered in the configuration stated in the Order code
[}101].
w However, some parameters can be modified quickly and easily via the quick
access: unit, start of measuring range, end of measuring range and damp-
ing.
1. You have the right to change the configuration.
2. Log onto the device and call up the Quick access [}41].
3. Carry out the required changes.
w The PC software inTouch
®
can be used for making more comprehensive
changes to the configuration.
4. Carry out the changes on the PC using the inTouch software.
5. Transfer the configuration to the device via the USB interface.
NOTICE!The configuration can also be changed using the keyboard in the
configuration menu.
4.4 Modbus RTU interface
The DE90 can also be delivered with a Modbus interface. This communication
interface is set in the menu Modbus RTU [}89].