FISCHER PRO-LINE DE90 - Page 42

5 | Operation FISCHER Mess- und Regeltechnik GmbH
42 BA_EN_DE90
Menu name Description
Meas.range C1 end The end of the measuring range of the
1st measuring channel is defined with
this parameter.
Damping C1 This parameter can be used to set a
damping for the 1st measuring chan-
nel.
Meas.range C2 unit A A defined unit for the 2nd measuring
channel can be selected in this sub-
menu.
Meas.range C2 start The start of the measuring range of the
2nd measuring channel is defined with
this parameter.
Meas.range C2 end The end of the measuring range of the
2nd measuring channel is defined with
this parameter.
Damping C2 This parameter can be used to set a
damping for the 2nd measuring chan-
nel.
Back E This represents the output (exit) of the
quick access menu. Press 'back' to re-
turn to the main menu.
Signpost [►Page]
• Language [}85]
• Designation [}85]
• Meas.range C1 unit [}48]
• Meas.range C1 start [}49]
• Meas.range C1 end [}50]
• Damping C1 [}50]
As all channels are configured identically, only the first channel is described.
This is why the links for the second channel are missing.