FISCHER PRO-LINE DE90 - Page 8

1 | Safety instructions FISCHER Mess- und Regeltechnik GmbH
8 BA_EN_DE90
Other symbols
This table explains how the different objects (menu, parameters, etc.) are
shown in these operating instructions.
Symbol Description
1
This symbol indicates that the switch output con-
tact is open.
1
This symbol indicates that the switch output con-
tact is closed.
Meas.data display This presentation is selected for parameter or
menu names.
U
This symbol indicates that the administrator is still
logged in.
U
1
U
2
U
3
This symbol indicates that one of the users is still
logged in. The number corresponds to the number
of the user.
M
U
1
This symbol indicates that user 1 only has one set
of read rights. The respective user number (see
above) is used for another user.
There is no symbol for writing/read rights.
A
This symbol indicates that there is a submenu
L
This symbol indicates that there is a blocked sub-
menu or parameter.
-E
This symbol is an indicator for the menu output at
the next highest level.
R
This symbol stands for an option that was not se-
lected in a list.
S
This symbol stands for a selected option from a
list.
h
This symbol stands for an activated property.
g
This symbol stands for a deactivated property.
This symbol stands for a short press of a button
This symbol stands for a permanent push of a but-
ton hereinafter call 'repeat' or 'button repeat'.
The guide stands for a collection of links that indic-
ate the path to certain topics.
Table1: Pictogram explanation