6 Mounting
FLUXUS F502TE 6.2 Transducers
39
UMFLUXUS_F502TEV1-5EN, 2020-05-29
• Tighten the cover screws (see Fig. 6.29).
Fig. 6.28: Adjustment of the transducer distance
1 – cover
2 – strain relief clamp
3 – equipotential bonding terminal
a – transducer distance
Notice!
Make sure that the coupling foil remains on the contact surface of the transducers. For information concerning the
coupling foil, see the safety data sheet. In case a safety data sheet is required, contact FLEXIM.
Fig. 6.29: Variofix L with transducers on the pipe
1 – equipotential bonding terminal
2 – cover screws
1 2
a
3
2
1
To Next Page
Loading...
