Set-up Menu
432-0012-00-10 Version 100 December 2015 25
Icon & text color: Red/White
VIS low light mode: On/Off
Set-up Menu
When Setup is selected from the main menu, the following OSD menu
is shown.
Save current settings as start-up defaults: Select this option to store the current camera
settings described below for start-up or anytime Restore settings from defaults is selected.
Restore settings from defaults: Select this option to revert to the stored values of the
following settings.
User interface preferences… See “User Interface Preferences Menu” on page 27.
NMEA settings… See “NMEA Settings” on page 29.
InstAlert highlight: Set the percentage of the highest temperatures in a scene to be displayed
in Red/Orange. All other temperatures are shown in grayscale.
IceAlert highlight: Set the percentage of the lowest temperatures in a scene to be displayed
in Blue/Green. All other temperatures are shown in grayscale.
Visible Camera Low Light mode: Select between Auto and Manual operation.
Active Camera Scene Color
Home position Polarity Stabilization
Icon display Help text Mirrored View
Joystick mode UPB assignments NMEA auto movement settings
InstAlert settings IceAlert settings
To Next Page
Loading...
Need help?
General
