FLOWBIRD CWT Compact S4 Touch - The Service Menu; Mechanical Design; General

Page 35CWT Compact S4 Touch Installation & Maintenance Manual for CWT 1.0-0Issue 3
Product description
4.6 The service menu
The service menu is shown when the CWT Compact switches into service mode
when you open the cabinet door. The numerous options in the service menu let
you:
1. Change terminal settings.
2. Export and import terminal settings.
3. Update the software and firmware of the terminal.
4. Export credit card transactions, etc.
Most of the functions available in the service mode can, however, be performed
more conveniently through the WebOffice Service.
The terminal exits the service mode when you close the door again. The printer
can produce a printout showing the software and firmware versions installed in the
terminal and numerous data regarding the printer, including the current printer
settings. This lets you check any changes you have made while in the service
mode. This feature is default enabled but can be disabled since the CWT
application 2.36.
Reference:
For a detailed description of the service menu see CWT Software Configuration
Handbook.
4.7 Mechanical design
In this Chapter:
· General
· Product label
· Inside the cabinet
· Inside the pedestal
· Door locks
· Door-open sensors
4.7.1
General
The terminal comes in 2 parts:
1. the upper part or Cabinet. See Inside the cabinet
2. the lower part or Pedestal. See Inside the pedestal
35
36
36
38
40
43
36
38