Page 39CWT Compact S4 Touch Installation & Maintenance Manual for CWT 1.0-0Issue 3
Product description
Figure 22, Pedestal interior (example)
4.7.4.1
COIN BOX Vault
Figure 23, Vault interior.
The coin box vault is made of 4 mm sheet metal with side drilling protection.
The vault door, made of 6 mm armoured steel, has six drilling protected locking
latches along its edges.
The coin box vault door lock, placed inside a drilling protected and anti-bolster
fitting, is of a high security mechanical type such as Kaba or any of the Abloy
locks Guard-x, Exec and Protec. All of them use a key profile that can only be
obtained from the original lock manufacturer. The key does not have any serrated
surfaces neither any sharp or pointed edges. Registered locks and keys are
available.
To Next Page
Loading...